FLEXIBILITY FOR
MECHANICAL ENGINEERING
The construction system for an efficient column setup
-
SENO-BSK12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
24,70 €excl. VAT -
SENO-BSK8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
19,00 €excl. VAT -
SENO-BSL12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
26,30 €excl. VAT -
SENO-BSL8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
23,80 €excl. VAT -
SENO-BSS12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
19,00 €excl. VAT -
SENO-BSS8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.
17,50 €excl. VAT -
SENO-GH is a holder designed for accommodating fork light barriers. It allows three-sided mounting onto the sensor shafts SENO-SW8 or SENO-SW12, as well as SENO-SWD8 or SENO-SWD12. The module is made of black anodized aluminum.
24,00 €excl. VAT -
SENO-GP12 is a detector holder for the parallel mounting of sensors with a diameter of 12.1 mm. It features an M5 thread and is therefore directly compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. Ideally suited for inductive sensors.
10,70 €excl. VAT -
SENO-GP8 is a detector holder for the parallel mounting of sensors with a diameter of 8.1 mm. It features an M5 thread and is therefore directly compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. Ideally suited for inductive sensors.
10,50 €excl. VAT -
SENO-GS12 is a detector holder for vertical mounting of 12.1 mm sensors. The module is mounted directly onto the sensor shafts SENO-SW8 or SENO-SW12 as well as SENO-SWD8 or SENO-SWD12 and is ideally suited for inductive sensors.
10,70 €excl. VAT -
SENO-GS8 is a detector holder for vertical mounting of 8.1 mm sensors. The module is mounted directly onto the sensor shafts SENO-SW8 or SENO-SW12 as well as SENO-SWD8 or SENO-SWD12 and is ideally suited for inductive sensors.
10,50 €excl. VAT -
is a stainless steel hinged connector for the stepless alignment of two columns up to ±90°. Compatible with the sensor shafts SENO-SW12 and SENO-SWD12.
11,00 €excl. VAT -
10,70 €excl. VAT -
SENO-KV12-12 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.
21,70 €excl. VAT -
SENO-KV12-20 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.
20,80 €excl. VAT -
SENO-KV20-20 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.
29,10 €excl. VAT -
SENO-KV20-30 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.
36,10 €excl. VAT -
SENO-KV30-30 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.
43,60 €excl. VAT -
SENO-KV8-12 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.
16,60 €excl. VAT -
SENO-KV8-8 is a cross connector made of aluminum, designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.
17,30 €excl. VAT -
SENO-LH is a light sensor holder with rotational capability for flexible alignment. It is compatible with common photoelectric sensors and can be adapted to sensor shafts of the types SENO-SW8, SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. The version is made of black anodized aluminum with an integrated stainless steel insert.
19,70 €excl. VAT -
SENO-RV12-12 is a rotary connector for joining two columns of the same diameter. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.
28,10 €excl. VAT -
SENO-RV8-12 is a rotary connector for joining two columns of different diameters. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.
31,20 €excl. VAT -
SENO-RV8-8 is a rotatable connector for joining two columns of the same diameter. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.
26,20 €excl. VAT -
SENO-SF12 is a compact sensor foot featuring mounting and locating holes for accommodating a column. It is suitable for mounting on work surfaces or for integration into assemblies. Due to its compact size, it is ideal for sensor applications.
19,90 €excl. VAT -
SENO-SF8 is a compact sensor base featuring mounting and locating holes for accommodating a column. It is suitable for mounting on work surfaces or for integration into assemblies. Due to its compact size, it is ideal for sensor applications.
16,70 €excl. VAT -
SENO-SW12 is a precision-ground stainless steel shaft with a diameter of 12 mm for sensor-proximal assemblies. One end features a threaded bore with a self-locking set screw for secure connection to modules.
18,70 € – 30,30 €excl. VAT -
SENO-SW8 is a precision-ground stainless steel shaft with a diameter of 8 mm for sensor-proximal assemblies. One end features a threaded bore with a self-locking set screw for secure connection to modules.
17,30 € – 26,50 €excl. VAT -
SENO-SWD is a precision-ground stainless steel shaft with a diameter of 12 mm. It features threaded bores at both ends with self-locking set screws, allowing module fastening on both sides for increased flexibility.
24,20 € – 36,90 €excl. VAT -
SENO-SWD8 is a precision-ground stainless steel shaft with a diameter of 8 mm. It features threaded bores at both ends with self-locking set screws, allowing module fastening on both sides for increased flexibility.
24,00 € – 33,10 €excl. VAT -
SENO-TV12 is a right-angled attachment for T-shaped connections of columns. Thanks to the integrated M5 thread, it is fully compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12.
15,10 €excl. VAT -
SENO-TV8 is a right-angled attachment for T-shaped connections of columns. Thanks to the integrated M5 thread, it is fully compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12.
12,80 €excl. VAT
