Standard Versand Archive

Adjustment Module 2.0 – 12 mm

The VARO-JMR12 is the optimized successor to the well-established alignment module VARO-JM12. Featuring an extended adjustment range of ±7.5 mm in the X direction and ±4.5 mm in the Y direction, as well as a rotational fine adjustment of ±2.5°, it provides maximum flexibility for precise alignment of assemblies.

Adjustment Module 2.0 – 20 mm

The VARO-JMR20 is the optimized successor to the well-established alignment module VARO-JM20. Featuring an extended adjustment range of ±9 mm in the X direction and ±5.5 mm in the Y direction, as well as a rotational fine adjustment of ±6°, it provides maximum flexibility for precise alignment of assemblies.

Adjustment Module 2.0 – 30 mm

The VARO-JMR30 is the optimized successor to the well-established alignment module VARO-JM30. Featuring an extended adjustment range of ±10 mm in the X direction and ±6.5 mm in the Y direction, as well as a rotational fine adjustment of ±7.5°, it provides maximum flexibility for precise alignment of assemblies.

Adjustment Module 2.0 – 40 mm

The VARO-JMR40 is the optimized successor to the well-established alignment module VARO-JM40. Featuring an extended adjustment range of ±14 mm in the X direction and ±8.5 mm in the Y direction, as well as a rotational fine adjustment of ±6.5°, it provides maximum flexibility for precise alignment of assemblies.

Adjustment Module 2.0 – 50 mm

The VARO-JMR50 is the optimized successor to the well-established alignment module VARO-JM50. Featuring an extended adjustment range of ±15 mm in the X direction and ±11 mm in the Y direction, as well as a rotational fine adjustment of ±5°, it provides maximum flexibility for the precise alignment of assemblies.

Adjustment Module 2.0 – 60 mm

The VARO-JMR60 is the optimized successor to the well-established alignment module VARO-JM60. Featuring an extended adjustment range of ±16 mm in the X direction and ±10 mm in the Y direction, as well as a rotational fine adjustment of ±4.5°, it provides maximum flexibility for precise alignment of assemblies.

Compensation Unit

Der Schwimmausgleich AXIS-SA50 dient als Ausgleichsmodul zur automatischen Mittenzentrierung bei Kontaktier- oder Einpressvorgängen. Das Modul gleicht Achsversatz und Lageabweichungen durch überfederte Mittenzentrierung zuverlässig aus.

Module Holder 20mm

ELO-MH20 is an aluminum module holder for attaching additional components such as DIN rails, cable ducts, control elements, or adapter plates. The version features a black anodized finish. The module can be mounted on columns of the corresponding size.

Module Holder 30mm

ELO-MH30 is an aluminum module holder for attaching additional components such as DIN rails, cable ducts, control elements, or adapter plates. The version features a black anodized finish. The module can be mounted on columns of the corresponding size.

Module Holder 40mm

ELO-MH40 is an aluminum module holder for attaching additional components such as DIN rails, cable ducts, control elements, or adapter plates. The version features a black anodized finish. The module can be mounted on columns of the corresponding size.

Retaining Clip 20mm

ELO-HK20 ist eine Halteklammer zur einfachen Führung von Kabeln und Schläuchen entlang modularer Säulen. Passend für Wellen Ø 20 mm. Lieferung im 10er Pack.

Sealing Cap

ELO-VK sind Abdeckkappen aus Silikon. Sie werden zum Verschließen der Innendurchgangsbohrung von Hohlwellen eingesetzt. Das Zubehör ist passend für die Module VIA-HSE und VIA-HS. Zum Download des jeweiligen Datenblatts bzw. STP-Modells wählen Sie eine Produktgröße.

Belt Pedestal Standard 8mm

SENO-BSS8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Belt Pedestal Standard 12mm

SENO-BSS12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Belt Pedestal Short 8mm

SENO-BSK8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Belt Pedestal Short 12mm

SENO-BSK12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Belt Pedestal Long 8mm

SENO-BSL8 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Belt Pedestal Long 12mm

SENO-BSL12 is a base for mounting on conveyor systems. It features a central mounting hole for accommodating a column and is also suitable for integration into technical assemblies.

Cross Connector 8-8mm

SENO-KV8-8 is a cross connector made of aluminum, designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.

Cross Connector 8-12mm

SENO-KV8-12 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.

Cross Connector 12-12mm

SENO-KV12-12 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.

Cross Connector 12-20mm

SENO-KV12-20 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.

Cross Connector 20-20mm

SENO-KV20-20 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.

Cross Connector 20-30mm

SENO-KV20-30 is a cross connector made of aluminum. It connects two columns of different sizes at a 90° angle, making it ideal for flexible branching in modular systems.

Cross Connector 30-30mm

SENO-KV30-30 is a cross connector designed to accommodate two columns of identical size at a 90° angle. It enables the right-angled continuation of modular structures.

Light Sensor Holder

SENO-LH is a light sensor holder with rotational capability for flexible alignment. It is compatible with common photoelectric sensors and can be adapted to sensor shafts of the types SENO-SW8, SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. The version is made of black anodized aluminum with an integrated stainless steel insert.

Holder for Forked Light Barriers

SENO-GH is a holder designed for accommodating fork light barriers. It allows three-sided mounting onto the sensor shafts SENO-SW8 or SENO-SW12, as well as SENO-SWD8 or SENO-SWD12. The module is made of black anodized aluminum.

Rotatable Connector 8-8mm

SENO-RV8-8 is a rotatable connector for joining two columns of the same diameter. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.

Rotatable Connector 8-12mm

SENO-RV8-12 is a rotary connector for joining two columns of different diameters. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.

Rotatable Connector 12-12mm

SENO-RV12-12 is a rotary connector for joining two columns of the same diameter. The module is rotatable through 360 degrees, allowing flexible continuation of the column assembly system at any desired angle. The version is made of black anodized aluminum.

Sensor Foot 8mm

SENO-SF8 is a compact sensor base featuring mounting and locating holes for accommodating a column. It is suitable for mounting on work surfaces or for integration into assemblies. Due to its compact size, it is ideal for sensor applications.

Sensor Foot 12mm

SENO-SF12 is a compact sensor foot featuring mounting and locating holes for accommodating a column. It is suitable for mounting on work surfaces or for integration into assemblies. Due to its compact size, it is ideal for sensor applications.

Tee Connector 8mm

SENO-TV8 is a right-angled attachment for T-shaped connections of columns. Thanks to the integrated M5 thread, it is fully compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12.

Tee Connector 12mm

SENO-TV12 is a right-angled attachment for T-shaped connections of columns. Thanks to the integrated M5 thread, it is fully compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12.

Detector Holder Parallel 8mm

SENO-GP8 is a detector holder for the parallel mounting of sensors with a diameter of 8.1 mm. It features an M5 thread and is therefore directly compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. Ideally suited for inductive sensors.

Detector Holder Parallel 12mm

SENO-GP12 is a detector holder for the parallel mounting of sensors with a diameter of 12.1 mm. It features an M5 thread and is therefore directly compatible with the sensor shafts SENO-SW8 and SENO-SW12, as well as SENO-SWD8 and SENO-SWD12. Ideally suited for inductive sensors.

Detector Holder Vertical 8mm

SENO-GS8 is a detector holder for vertical mounting of 8.1 mm sensors. The module is mounted directly onto the sensor shafts SENO-SW8 or SENO-SW12 as well as SENO-SWD8 or SENO-SWD12 and is ideally suited for inductive sensors.

Detector Holder Vertical 12mm

SENO-GS12 is a detector holder for vertical mounting of 12.1 mm sensors. The module is mounted directly onto the sensor shafts SENO-SW8 or SENO-SW12 as well as SENO-SWD8 or SENO-SWD12 and is ideally suited for inductive sensors.

Sensor Shaft 8mm

SENO-SW8 is a precision-ground stainless steel shaft with a diameter of 8 mm for sensor-proximal assemblies. One end features a threaded bore with a self-locking set screw for secure connection to modules.

Sensor Shaft 12mm

SENO-SW12 is a precision-ground stainless steel shaft with a diameter of 12 mm for sensor-proximal assemblies. One end features a threaded bore with a self-locking set screw for secure connection to modules.

Sensor Shaft Dual 8mm

SENO-SWD8 is a precision-ground stainless steel shaft with a diameter of 8 mm. It features threaded bores at both ends with self-locking set screws, allowing module fastening on both sides for increased flexibility.

Sensor Shaft Dual 12mm

SENO-SWD is a precision-ground stainless steel shaft with a diameter of 12 mm. It features threaded bores at both ends with self-locking set screws, allowing module fastening on both sides for increased flexibility.

Hinged Connector 8mm

SENO-GV8 is a stainless steel hinged connector for the stepless alignment of two columns up to ±90°. Compatible with the sensor shafts SENO-SW8 and SENO-SWD8.

Hinged Connector 12mm

SENO-GV12 is a stainless-steel joint connector for stepless alignment of two columns up to ±90°. It is compatible with the sensor shafts SENO-SW12 and SENO-SWD12.

Multi-Connector 20mm

EVO-MV20 is a multi-connector featuring precisely machined mounting and locating bores. It enables accurate positioning and secure attachment of modules and connecting elements to 20 mm columns. With matching adapter components, the module can be flexibly expanded and adapted to various requirements in modular assemblies.

Multi-Connector-Adapter

EVO-MVA20 ist ein Adapter zur Verbindung von zwei Mehrfachverbindern des Typs EVO-MV20. Damit lassen sich modulare Strukturen mit mehreren Verzweigungspunkten realisieren.

Multi-Connector-Bore

EVO-MVB20 ist ein Zubehörmodul aus Edelstahl für den Mehrfachverbinder EVO-MV20. Es verfügt über eine Senkbohrung und dient zur Befestigung an Arbeitsflächen oder zum Integrieren in Baugruppen.

Multi-Connector-Cover

EVO-MVD20 ist eine Abdeckkappe für den Mehrfachverbinder EVO-MV20. Das Zubehörteil wird formschlüssig in nicht genutzte Bohrungen eingesetzt und dient als Deckel, Verschlusskappe oder Blindelement zur sauberen Abdeckung offener Anschlussstellen. Die Ausführung ist schwarz eloxiert.

Multi-Connector-Thread

EVO-MVG ist ein Zubehörmodul aus Edelstahl für den Mehrfachverbinder EVO-MV20. Es dient als Befestigungselement und verfügt über ein metrisches Innengewinde. Verfügbar in den Gewindegrößen M4, M5 und M6. Geeignet zur Schraubmontage von Komponenten im uversa System.

Dual-Traverse-Connector 30-20mm

EVO-DT3020 is a connecting element for columns of two different sizes. It enables right-angled constructions, making it ideal for portal structures in mechanical engineering.

Dual-Traverse-Connector 40-30mm

EVO-DT4030 is a connecting element for columns of two different sizes. It enables right-angled constructions, making it ideal for portal structures in mechanical engineering.

Dual-Traverse-Connector 50-40mm

EVO-DT5040 is a connecting element for columns of two different sizes. It enables right-angled constructions, making it ideal for portal structures in mechanical engineering.

Dual-Traverse-Connector 60-50mm

EVO-DT6050 is a connecting element for columns of two different sizes. It enables right-angled constructions, making it ideal for portal structures in mechanical engineering.

Mono-Traverse-Connector 30-20mm

EVO-MT3020 is a connecting module designed to accommodate two columns of different sizes at a right angle. It is used to expand or reduce existing structures and is ideal for modular portal and frame constructions in mechanical engineering.

Mono-Traverse-Connector 40-30mm

EVO-MT4030 is a connecting module designed to accommodate two columns of different sizes at a right angle. It is used to expand or reduce existing structures and is ideal for modular portal and frame constructions in mechanical engineering.

Mono-Traverse-Connector 50-40mm

EVO-MT5040 is a connecting module designed to accommodate two columns of different sizes at a right angle. It is used to expand or reduce existing structures and is ideal for modular portal and frame constructions in mechanical engineering.

Mono-Traverse-Connector 60-50mm

EVO-MT6050 is a connecting module designed to accommodate two columns of different sizes at a right angle. It is used to expand or reduce existing structures and is ideal for modular portal and frame constructions in mechanical engineering.

Mono Pedestal 12mm

Der Säulenfuß PEX-MS12 ist ein kompakter Mono-Sockel für den modularen Aufbau von Baugruppen. Seine präzise bearbeiteten Bohrungen erleichtern die Ausrichtung und Befestigung von Systemsäulen. Der Sockel besteht aus eloxiertem Aluminium, ist in verschiedenen Eloxal-Farben und auch als leitfähige Variante für ESD-Schutzzonen erhältlich. Alternativ kann er auch als Mono-Modul EVO-MM12 eingesetzt werden.

Mono Pedestal 20mm

The column base PEX-MS20 is a compact mono socket for the modular construction of assemblies. Its precisely machined bores facilitate the alignment and mounting of system columns. The base is made of anodized aluminum and is available in various colors, including a conductive version for use in ESD protection zones.

Mono Pedestal 30mm

The column base PEX-MS30 is a compact mono pedestal for the modular construction of assemblies. Its precisely machined bores facilitate the alignment and mounting of system columns. The pedestal is made of anodized aluminum and is available in various colors, including a conductive version for use in ESD protection zones.

Mono Pedestal 40mm

The column base PEX-MS40 is a compact mono pedestal for the modular construction of assemblies. Its precisely machined bores facilitate the alignment and mounting of system columns. The pedestal is made of anodized aluminum and is available in various colors, including a conductive version for use in ESD protection zones.

Mono Pedestal 50mm

The column base PEX-MS50 is a compact mono pedestal for the modular construction of assemblies. Its precisely machined bores facilitate the alignment and mounting of system columns. The pedestal is made of anodized aluminum and is available in various colors, including a conductive version for use in ESD protection zones.

Mono Pedestal 60mm

The column base PEX-MS60 is a compact mono pedestal for the modular construction of assemblies. Its precisely machined bores facilitate the alignment and mounting of system columns. The pedestal is made of anodized aluminum and is available in various colors, including a conductive version for use in ESD protection zones.

Duo Pedestal 12mm

The column base PEX-DS12 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Duo Pedestal 20mm

The column base PEX-DS20 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Duo Pedestal 30mm

The column base PEX-DS30 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Duo Pedestal 40mm

The column base PEX-DS40 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Duo Pedestal 50mm

The column base PEX-DS50 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Duo Pedestal 60mm

The column base PEX-DS60 is a duo pedestal for modular assemblies in mechanical engineering. Two locating bores allow for the parallel mounting of system columns. The pedestal is available in various colors and also in an ESD-conductive version.

Clamping-Module 12mm

EVO-KM12 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Clamping-Module 20mm

EVO-KM20 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Clamping-Module 30mm

EVO-KM30 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Clamping-Module 40mm

EVO-KM40 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Clamping-Module 50mm

EVO-KM50 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Clamping-Module 60mm

EVO-KM60 is a two-piece clamping module for modular two-column systems. It features locating bores for precise positioning and is available in various colors as well as with a SurTec 650® coating.

Mono-Module 20mm

EVO-MM20 is an installation-friendly mono module for lateral mounting on single-column systems. Its two-part design enables quick and easy retrofitting, making it ideal for modular system assemblies in mechanical engineering.

Mono-Module 30mm

EVO-MM30 is an installation-friendly mono module for lateral mounting on single-column systems. Its two-part design enables quick and easy retrofitting, making it ideal for modular system assemblies in mechanical engineering.

Mono-Module 40mm

EVO-MM40 is an installation-friendly mono module for lateral mounting on single-column systems. Its two-part design enables quick and easy retrofitting, making it ideal for modular system assemblies in mechanical engineering.

Mono-Module 50mm

EVO-MM50 is an installation-friendly mono module for lateral mounting on single-column systems. Its two-part design enables quick and easy retrofitting, making it ideal for modular system assemblies in mechanical engineering.

Mono-Module 60mm

EVO-MM60 is an installation-friendly mono module for lateral mounting on single-column systems. Its two-part design enables quick and easy retrofitting, making it ideal for modular system assemblies in mechanical engineering.

Dual-Module 12mm

EVO-DM12 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Dual-Module 20mm

EVO-DM20 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Dual-Module 30mm

EVO-DM30 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Dual-Module 40mm

EVO-DM40 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Dual-Module 50mm

EVO-DM50 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Dual-Module 60mm

EVO-DM60 is a two-piece mounting module for precise positioning on two-column systems. Its design allows for subsequent installation, making it suitable for modular applications in mechanical engineering.

Set-Collar 12mm

DIA-SR12 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Set-Collar 20mm

DIA-SR20 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Set-Collar 30mm

DIA-SR30 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Set-Collar 40mm

DIA-SR40 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Set-Collar 50mm

DIA-SR50 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Set-Collar 60mm

DIA-SR60 is a positioning collar designed for height adjustment when assembling mono and duo modules. The precisely adjustable positioning aid is ideal for modular systems in mechanical engineering.

Adjustment Module 12mm

VARO-JM12 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Adjustment Module 20mm

VARO-JM20 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Adjustment Module 30mm

VARO-JM30 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Adjustment Module 40mm

VARO-JM40 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Adjustment Module 50mm

VARO-JM50 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Adjustment Module 60mm

VARO-JM60 is an alignment module for precise positioning of components in the X–Y plane. The adjustment range of ±3 mm enables targeted compensation of manufacturing tolerances within assemblies or on work surfaces.

Hollow Column 20mm

VIA-HS is a ground and induction-hardened hollow steel column. It serves as a central connecting element for modular assembly configurations.

Hollow Column 30mm

VIA-HS is a ground and induction-hardened hollow steel column. It serves as a central connecting element for modular assembly configurations.

Hollow Column 40mm

VIA-HS is a ground and induction-hardened hollow steel column. It serves as a central connecting element for modular assembly configurations.

Hollow Column 50mm

VIA-HS is a ground and induction-hardened hollow steel column. It serves as a central connecting element for modular assembly configurations.

Hollow Column 60mm

VIA-HS is a ground and induction-hardened hollow steel column. It serves as a central connecting element for modular assembly configurations.

Massive Column Stainless Steel 8mm

VIA-VSE is a ground solid stainless-steel column. It serves as a load-bearing element for modular assemblies and enables flexible connection solutions.

Massive Column Stainless Steel 12mm

VIA-VSE is a ground solid stainless-steel column. It serves as a load-bearing element for modular assemblies and enables flexible connection solutions.

Massive Column Stainless Steel 20mm

VIA-VSE is a ground solid stainless-steel column. It serves as a load-bearing element for modular assemblies and enables flexible connection solutions.

Hollow Column Stainless Steel 30mm

VIA-HSE is a ground hollow stainless-steel column. It serves as a central connecting element for modular assemblies with flexible structural configurations.

Hollow Column Stainless Steel 40mm

VIA-HSE is a ground hollow stainless-steel column. It serves as a central connecting element for modular assemblies with flexible structural configurations.

Hollow Column Stainless Steel 50mm

VIA-HSE is a ground hollow stainless-steel column. It serves as a central connecting element for modular assemblies with flexible structural configurations.